Product Code : ME-Al-6N-SF
Aluminium foil is aluminium prepared in thin metal leaves. The foil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful.
ATT specializes in producing Aluminum High Purity Foil in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most foils are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
Aluminium foil is aluminium prepared in thin metal leaves. The foil is pliable, and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated with other materials such as plastics or paper to make them stronger and more useful.
ATT specializes in producing Aluminum High Purity Foil in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most foils are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation.
Synonyms
Ultra High Vacuum (UHV) Aluminum Foil, QQ-A-1876, IRMM523A, IRMM523B, IRMM523C, 1.01057, 356859, 326860, 326852, 266574, 266957, 266590, 733369, 11374, 11375, 11376, 14192, 14196, 38366, 40531, 40760, 43424, 43425, 43776, 43777, 44330, 44331
Aluminium Foil Specification
Size：Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings.
Surface Treatment: Polished
Per your request or drawing
We can customized as required
Properties (Theoretical)
| Molecular Weight | 26.98 |
| Appearance | solid |
| Melting Point | 660.37 °C |
| Boiling Point | 2467 °C |
| Density | 2700 kg/m3 |
| Solubility in H2O | N/A |
| Electrical Resistivity | 2.6548 microhm-cm @ 0 °C |
| Electronegativity | 1.5 Paulings |
| Heat of Fusion | 2.55 Cal/gm mole |
| Heat of Vaporization | 67.9 K-Cal/gm at om at 765 °C |
| Poisson's Ratio | 0.35 |
| Specific Heat | 0.215 Cal/g/ K @ 25 °C |
| Tensile Strength | 6800 psi Coldroled 16,000 psi. |
| Thermal Conductivity | 2.37 W/cm/ K @ 298.2 K |
| Thermal Expansion | (25 °C) 23.1 µm·m-1·K-1 |
| Vickers Hardness | 167 MPa |
| Young's Modulus | 70 GPa |
| Superconductivity critical temperature ( K ) | 1.1750 |
| Temperature coefficient ( K⁻¹ ) | 0.00450 @0-100°C |
| Thermal emf against Pt (cold 0C - hot 100C) ( mV ) | 0.42 |
Applications of Aluminium Foil
Aluminium foil is used in food containers, bins, bottle caps, soft packages for liquids or bulk food stuffs and many other types of containers. Foil protects foods against sunlight exposure which can cause them to go bad.
Packing of Aluminium Foil
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’Aluminium Foil is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
| Linear Formula | Al |
| CAS | 7429-90-5 |
| MDL Number | MFCD00134029 |
| EC No. | 231-072-3 |
| Beilstein/Reaxys No. | N/A |
| Pubchem CID | 5359268 |
| IUPAC Name | aluminum |
| SMILES | [Al] |
| InchI Identifier | InChI=1S/Al |
| InchI Key | XAGFODPZIPBFFR-UHFFFAOYSA-N |
