Titanium Based Molybdenum Zirconium Aluminum Alloy

Product Information

An aluminium alloy is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required. 

Titanium based Molybdenum Zirconium Aluminum is one of numerous metal alloys sold by ATT under the trade name ATT Alloys™. Generally immediately available in most volumes, ATT Alloys™ are available as bar, ingot, ribbon, wire, shot, sheet, and foil. Ultra high purity and high purity forms also include metal powder, submicron powder and nanoscale, targets for thin film deposition, and pellets for chemical vapor deposition (CVD) and physical vapor deposition (PVD) applications. ATT produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Primary applications include bearing assembly, ballast, casting, step soldering, and radiation shielding. Titanium has become a fundamental material used in medicine due to its ability to resist corrosion, its biocompatibility and its natural ability to join with human bone. There are many medical materials made with Titanium including, surgical titanium instruments, orthopedic titanium rods, pins and plates, medical and dental titanium. These bio-medical materials are biocompatible, resistant to corrosion, degradation, and wear, and they have mechanical properties that duplicate the structures they are intended to replace.

Synonyms

Titanium Based Molybdenum Zirconium Aluminum Alloy Specification

Size：customized

Per your request or drawing

We can customized as required

Properties (Theoretical)

Titanium Based Molybdenum Zirconium Aluminum Alloy Products

Applications of Titanium Based Molybdenum Zirconium Aluminum Alloy

These master alloys are used in the manufacture of a wide range of metal products, including aluminium aircraft sheet, special steels and super alloys for aircraft engines, products for aerospace applications, nuclear reactors and other demanding applications.

Packing of Titanium Based Molybdenum Zirconium Aluminum Alloy

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Titanium Based Molybdenum Zirconium Aluminum Alloy is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers