Product Code : ME-Li-5N-IN
Lithium is a soft, silver metal, and is the first member of the alkali group of metals. It is the lightest of all metals and, whilst resembling sodium chemically, it is less active. As is the case for other alkali group elements, it is obtained by the electrolysis of the fused halides. The abundance of lithium in the earth's crust is 20 ppm. Lithium reacts slowly in water and in air where it eventually forms a black coating of oxide. This means that this metal tends to be stored under oil to prevent deterioration. Lithium is used as an alloying agent with aluminium and magnesium, and in the manufacture of batteries. Compounds of lithium are used in various applications; for example, lithium 12-hydroxy stearate is used in high performance greases as it provides good water resistance and good low temperature performance; lithium hydride is a strong reducing agent and is used as a source of hydrogen, and lithium carbonate is used as a tranquiliser and in the treatment of some mental illnesses. Lithium and its compounds also find applications in the manufacture of glass and ceramics. Lithium Metal is available as disc, granules, ingot, pellets, pieces, powder , rod, wire, and sputtering target. Ultra high purity and high purity forms also include metal powder, submicron powder and nanoscale, quantum dots, targets for thin film deposition, pellets for evaporation and single crystal or polycrystalline forms. Elements can also be introduced into alloys or other systems as fluorides, oxides or chlorides or as solutions.
ATT produces metallic Lithium Ingots with the highest possible density. Ingots are generally the least costly metallic form and useful in general applications. Our standard Ingot size is nominally 2-3 cm x 3-8 cm x 6-12 cm. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We can also provide pieces and shot in smaller ranges. ATT produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. We also produce Lithium as rod, pellets, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
Lithium is a soft, silver metal, and is the first member of the alkali group of metals. It is the lightest of all metals and, whilst resembling sodium chemically, it is less active. As is the case for other alkali group elements, it is obtained by the electrolysis of the fused halides. The abundance of lithium in the earth's crust is 20 ppm. Lithium reacts slowly in water and in air where it eventually forms a black coating of oxide. This means that this metal tends to be stored under oil to prevent deterioration. Lithium is used as an alloying agent with aluminium and magnesium, and in the manufacture of batteries. Compounds of lithium are used in various applications; for example, lithium 12-hydroxy stearate is used in high performance greases as it provides good water resistance and good low temperature performance; lithium hydride is a strong reducing agent and is used as a source of hydrogen, and lithium carbonate is used as a tranquiliser and in the treatment of some mental illnesses. Lithium and its compounds also find applications in the manufacture of glass and ceramics. Lithium Metal is available as disc, granules, ingot, pellets, pieces, powder , rod, wire, and sputtering target. Ultra high purity and high purity forms also include metal powder, submicron powder and nanoscale, quantum dots, targets for thin film deposition, pellets for evaporation and single crystal or polycrystalline forms. Elements can also be introduced into alloys or other systems as fluorides, oxides or chlorides or as solutions.
ATT produces metallic Lithium Ingots with the highest possible density. Ingots are generally the least costly metallic form and useful in general applications. Our standard Ingot size is nominally 2-3 cm x 3-8 cm x 6-12 cm. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We can also provide pieces and shot in smaller ranges. ATT produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. We also produce Lithium as rod, pellets, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Synonyms
00658
Lithium Ingot Specification
Size： Our standard Ingot size is nominally 2-3 cm x 3-8 cm x 6-12 cm.
Purity:2N(99%), 3N(99.9%), 4N(99.99%), 5N(99.999%).
Per your request or drawing
We can customized as required
Properties（Theoretical）
| Molecular Weight | 6.941 |
| Appearance | Silvery White |
| Melting Point | 180.54 °C |
| Boiling Point | 1342 °C |
| Density | 0.534 g/cm3 |
| Solubility in H2O | N/A |
| Electrical Resistivity | 8.55 microhm-cm @ 0 °C |
| Electronegativity | 1.0 Paulings |
| Heat of Fusion | 1.10 Cal/gm mole |
| Heat of Vaporization | 32.48 K-Cal/gm atom at 1342 °C |
| Poisson's Ratio | N/A |
| Specific Heat | 0.85 Cal/g/K @ 25 °C |
| Tensile Strength | N/A |
| Thermal Conductivity | 0.848 W/cm/K @ 298-C.2 K |
| Thermal Expansion | (25 °C) 46 µm·m-1·K-1 |
| Vickers Hardness | N/A |
| Young's Modulus | 4.9 GPa |
Chemical composition
Purity：3N（99.9%）
| Element | Value |
| Al | 5 PPM |
| Na | 80 PPM |
| Ca | 10 PPM |
| K | 60 PPM |
| Si | 10 PPM |
| Cl | 40 PPM |
| Fe | 50 PPM |
| N | 40 PPM |
We can customized as required
Applications of Lithium Ingot
Lithium ingot is widely demanded in of anode in lithium batteries. As lithium is most lightest and electronegative metal, thus it provides highest electrochemical equivalence.Packing of Lithium Ingot
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’Lithium Ingot is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
| Linear Formula | Li |
| CAS | 7439-93-2 |
| MDL Number | MFCD00134051 |
| EC No. | 231-102-5 |
| Beilstein/Reaxys No. | N/A |
| Pubchem CID | 3028194 |
| SMILES | [Li] |
| InchI Identifier | InChI=1S/Li |
| InchI Key | WHXSMMKQMYFTQS-UHFFFAOYSA-N |
