Product Code : AL-FeCrMoVSi-Fe4Cr5MoSiV-PO
Our spherical free-flowing metal powders are engineered to be agglomerate-free with extremely low oxygen and carbon content, consistent micro-structure and tightly controlled morphology and particle size distributions which enable the production of large complex structures without sacrificing the material's integrity.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
Our spherical free-flowing metal powders are engineered to be agglomerate-free with extremely low oxygen and carbon content, consistent micro-structure and tightly controlled morphology and particle size distributions which enable the production of large complex structures without sacrificing the material's integrity.
ATT is a professional supplier of high-purity H13 Steel Powder. We also produce disc, granules, ingot, pellets, pieces, rod, wire, sputtering target and in numerous other forms and custom shapes. Other shapes are available by request.
H13 Steel Powder Synonyms
4Cr5MoSiV steel, H13 High speed steel, H13 Hot work tool steel
H13 Steel Powder Specification
Per your request or drawing
We can customized as required
Properties（Theoretical）
| Compound Formula | Fe-Cr-Mo-V-Si |
| Appearance | Gray powder |
| Melting Point | N/A |
| Boiling Point | N/A |
| Density | 7.75 g/cm3 |
| Solubility in H2O | N/A |
| Poisson's Ratio | 0.30 |
| Specific Heat | 0.460 J/g·°C |
| Tensile Strength | 1990 MPa (Ultimate) |
| Thermal Conductivity | 17.5 W/m·°C (27 °C) |
Characteristics
Low pick-up of oxygen and other impurities
Perfectly spherical and essentially satellite-free
Narrow particle size distribution.
high flowability and high packing density
Low internal porosity
Properties
High hardenability and high toughness.
Excellent resistance to thermal cracking and can be water-cooled in the workplace.
It has a medium resistance to wear and tear, and may also be carburized or nitrided to increase their surface hardness, but with a slightly reduced resistance to thermal cracking.
Poor secondary hardening ability in tempering due to its low carbon content.
Resistance to softening at higher temperatures, but the rapid loss of hardness at operating temperatures above 540°C (1000°F) (i.e. a working temperature of 540°C can be tolerated).
Low heat treatment distortion.
Medium and high machinability.
Medium resistance to decarburization.
Packing of H13 Steel Powder
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’H13 Steel Powder is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
| Linear Formula | Fe-Cr-Mo-V-Si |
| MDL Number | N/A |
| EC No. | N/A |
