Home > Products > Metal & Alloys > Other Metal And Alloys > Thallium Metal and Alloys > Thallium Sleeves

Thallium Sleeves

Product Code : ME-Ti-5N-SL

ATT specializes in supplying seamless Thallium Sleeves and Sheaths with a variety of dimensions including round, rectangular, square, and oval in numerous standard diameters from 0.02 to 6.0 inches and wall thicknesses from 0.003 to 0.500 inches. Sleeves and sheaths can be further processed to produce rings, washers, sleeves and sheaths. Custom configurations are also available. Sleeves can be threaded to customer specified dimensions. Materials include most metals including the rare earth metals and other advanced materials. Sleeves and sheaths can also be produced from custom alloys for commercial and research applications and for new proprietary technologies. Other available shapes include bar or plate form, as well as custom machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. ATT produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. 

ATT is a professional supplier of Thallium Sleeves, and we also manufacture plates, balls, ingots, balls, sheets, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.

Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.

Product Product Code Purity Size Contact Us
Thallium Sleeves ME-Ti-2N-SL 99% Customized
Thallium Sleeves ME-Ti-3N-SL 99.9% Customized
Thallium Sleeves ME-Ti-4N-SL 99.99% Customized
Thallium Sleeves ME-Ti-5N-SL 99.999% Customized

Product Information

ATT specializes in producing high-purity thallium phosphide sputtering targets with the highest density and smallest average grain size for semiconductor, chemical Vapor deposition (CVD) and physical vapor deposition (PVD) displays and optical applications. Our standard sputtering targets for thin films are available in single or combined flat target sizes and configurations up to 820 mm, with drill positions and threads, bevels, grooves and backings, designed for use with older sputtering equipment as well as the latest process equipment, such as large area coatings for solar or fuel cell and flip-chip applications. Research sizes are also targeted for production as well as custom sizes and alloys. All targets were analyzed using best-in-class demonstration techniques, including X-ray fluorescence (XRF), glow discharge mass spectrometry (GDMS), and inductively coupled plasma (ICP). "Sputtering" allows deposition of an ultra-high purity thin film of sputtered metal or oxide material onto another solid substrate, controlled removal of the target material by ion bombardment and conversion into a directed gas/plasma phase. Materials are produced by ultra-high purification processes such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT also casts any rare earth metal and most other advanced materials into the form of rods, rods or plates, as well as other mechanical shapes.

ATT is a professional supplier of thallium sputtering targets, and we also manufacture plates, balls, ingots, balls, sheets, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.


Thallium Sleeves Properties (Theoretical)

Molecular Weight204.37
AppearanceWhite Crystals
Melting Point303.5 °C
Boiling Point1457 °C
Density11.85 g/cm3
Solubility in H2ON/A
Electrical Resistivity18.0 microhm-cm @ 0 °C
Electronegativity1.8 Paulings
Heat of Fusion1.03 Cal/gm mole
Heat of Vaporization38.8 K-Cal/gm atom at 1457 °C
Specific Heat0.0307 Cal/g/K @ 25 °C
Tensile StrengthN/A
Thermal Conductivity0.461 W/cm/K @ 298.2 K

Applications of Thallium Sleeves

Most thallium is used by the electronics industry in photoelectric cells. Thallium oxide is used to produce special glass with a high index of refraction, and also low melting glass that becomes fluid at about 125K. An alloy of mercury containing 8% thallium has a melting point 20°C lower than mercury alone.

Packing of Thallium Sleeves

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Thallium Sleeves is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers

Linear FormulaTl
MDL NumberMFCD00134063
EC No.231-138-1
Beilstein/Reaxys No.N/A
Pubchem CID5359464
InchI IdentifierInChI=1S/Tl

Related Products