Product Code : AL-WSe2-CU
Tungsten was used extensively for the filaments of old-style incandescent light bulbs, but these have been phased out in many countries. This is because they are not very energy efficient; they produce much more heat than light.Tungsten has the highest melting point of all metals and is alloyed with other metals to strengthen them. Tungsten and its alloys are used in many high-temperature applications, such as arc-welding electrodes and heating elements in high-temperature furnaces.
Two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted increasing attention owing to their diverse properties ranging from insulator to metal and promising for a wide range of applications. TMDs and their 2D van der Waals heterostructures have been proposed and demonstrated in various applications, such as electronics, optoelectronics, photonics and photovoltaics.
Among TMDs, tungsten diselenide (WSe2) is regarded as one of the most important species in the TMDs family. While most TMDs show n-type characteristic transport behavior in field-effect transistors (FETs), monolayer WSe2 exhibits p-type characteristic behavior. Moreover, it shows a high quantum yield (1.6x10-1) in photoluminescence (PL), a high absorption coefficient in the visible to infrared range, and the valley-dependent optical Stark effect. These characteristics make monolayer WSe2 appealing for a wide variety of potential applications including digital electronics, optoelectronics, and valleytronics.
ATT is a professional supplier of Tungsten Diselenide CVD Film (WSe2), We also produce disc, granules, ingot, pellets, pieces, powder, rod, wire, sputtering target and in numerous other forms and custom shapes. Other shapes are available by request.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
Tungsten was used extensively for the filaments of old-style incandescent light bulbs, but these have been phased out in many countries. This is because they are not very energy efficient; they produce much more heat than light.Tungsten has the highest melting point of all metals and is alloyed with other metals to strengthen them. Tungsten and its alloys are used in many high-temperature applications, such as arc-welding electrodes and heating elements in high-temperature furnaces.
Two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted increasing attention owing to their diverse properties ranging from insulator to metal and promising for a wide range of applications. TMDs and their 2D van der Waals heterostructures have been proposed and demonstrated in various applications, such as electronics, optoelectronics, photonics and photovoltaics.
Among TMDs, tungsten diselenide (WSe2) is regarded as one of the most important species in the TMDs family. While most TMDs show n-type characteristic transport behavior in field-effect transistors (FETs), monolayer WSe2 exhibits p-type characteristic behavior. Moreover, it shows a high quantum yield (1.6x10-1) in photoluminescence (PL), a high absorption coefficient in the visible to infrared range, and the valley-dependent optical Stark effect. These characteristics make monolayer WSe2 appealing for a wide variety of potential applications including digital electronics, optoelectronics, and valleytronics.
ATT is a professional supplier of Tungsten Diselenide CVD Film (WSe2), We also produce disc, granules, ingot, pellets, pieces, powder, rod, wire, sputtering target and in numerous other forms and custom shapes. Other shapes are available by request.
Synonyms
Tungsten Diselenide CVD Film (WSe2)
| Type | Single crystal grains |
| Substrate Material | SiO2/Si, silicon wafer, PET, PI, ITO, FTO, glass. |
| Size | 10*10, 15*15, 20*20 mm, or customized |
| Method | Chemical Vapor Deposition (CVD) |
Per your request or drawing
We can customized as require
Tungsten Diselenide CVD Film (WSe2) Description
ATT provides Tungsten Diselenide CVD Films on various substrates, such as SiO2/Si, silicon wafer, PET, PI, ITO, FTO, glass.
There are many types of WSe2 films:
1) A single layer of discretely distributed triangular-shaped single-crystal grains, the side length of the triangle is generally tens to 100 microns.
2) A single-layer continuous film that continues to grow together from triangular grains.
3) Multi-layer WSe2 continuous film.
4) Substrate: WSe2 has many optional substrates, among which the sapphire substrate is a direct deposition product. Other substrates such as SiO2/Si, silicon wafer, PET, PI, ITO, FTO, glass, metal substrates, etc. are transferred to the customer's required substrate by growing on sapphire.
Applications of Tungsten Diselenide CVD Film (WSe2)
Optoelectronic devices, microelectronic devices, biological sensing, chemical sensing and other fields.
Packing of Tungsten Diselenide CVD Film (WSe2)
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’Tungsten Diselenide CVD Film (WSe2) is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
